How to Change the Voltage on Anet ET Series 3D Printers

The Anet ET Series 3D printers are designed without voltage switch beside printers. While, if you didn’t get your printer with the right rated voltage(s) for the country you live. Then you need to set the switch correctly, either 110V or 220V.

You need to open the operation base of your Anet ET series printer, and you could find a switch on the side of the power supply, that you can switch between 110V and 220V with it.

A switch on the side of the power supply that can switch between 110V and 220V

http://3dprintingmods.com/power-supply-voltage-switch-on-anet-et-series-3d-printers/


Older Post Newer Post